Baxi Belmont 2 Manual de Serviço

Baxi Wentworth PCF ClassicBaxi Kingston 2 PCF ClassicBaxi Belmont 2Please leave these instructions withthe userLive Fuel Effect Inset Gas FiresComp No

103.0 Site Requirements – Page 103.10 Gas Supply & Connection1. The gas supply is to be connected to the appliance asa concealed fix from the re

114.0 Installation – Page 114.1 Initial Preparation1. Unpack the appliance from the carton and check allitems are present. The ceramic coal bed item

124.0 Installation – Page 124.2 Fitting the Fire (cont)8. Engage the tensioning nuts on the threaded shanks ofthe tensioning devices. Run the nuts do

135.0 Commissioning the Fire – Page 135.1 Checking Gas Soundness1. Turn on the gas supply and check for gas soundnesswith leak detection fluid (to BS

146.0 Arranging the Coals – Page 146.1 IdentificationIt is important that all the firebed components areused and arranged as shown in order to achieve

156.0 Arranging the Coals – Page 156.2 Arranging the CoalbedNOTE: It is important for the safe operation of theappliance that the front and rear coal

166.0 Arranging the Coals – Page 166.3 Arranging the Loose CoalsNOTE: Due care and attention to these instructionsshould be taken when positioning th

177.0 Checking for Spillage – Page 177.1 Checking for SpillageCAUTION-Whilst checking for spillage care must betaken to avoid touching hot panels.1.

188.0 Fitting the Trim & Fender – Page 188.1 Fitting the Trim and Fender1. Carefully remove the trim and fender from theirpackaging. Place trim o

199.0 Annual Servicing – Page 199.1 MaintenanceIMPORTANT: It is possible that some soot may bedeposited on the coals after use. This is acceptablepro

2Page 2Natural GasBaxi Wentworth PCF ClassicG.C. No 32 075 13ABaxi Kingston 2 PCF ClassicG.C. No 32 075 19ABaxi Belmont 2G.C. No 32 075 22Baxi Limited

209.0 Annual Servicing – Page 209.2 Preparation1. For reasons of safety and economy it is important toservice the fire annually.WARNING: Isolate the

219.0 Annual Servicing – Page 219.3 Cleaning the Burner and Injectors1. Undo the screw retaining the spark electrode to theburner tray (Fig. 40).2.

229.0 Annual Servicing – Page 229.5 Cleaning the Electrode (Fig. 44 & 45)1. Check for any signs of cracking or other damage to theceramic.2. Cle

2310 0 Changing Components – Page 2310.1 Changing ComponentsWARNING: Isolate the gas supply to the appliancebefore changing any components.1. Remov

2410.0 Changing Components – Page 2410.4 Removal of Controls/Burner Chassis Assembly1. If any of the controls components are to be renewedthe burner

2510 Changing Components – Page 2510.7 Electrode (Fig. 53 & 54)1. Disconnect the electrode lead from the tag at the baseof the electrode.2. Und

2610.0 Changing Components – Page 2610.9 Gas Tap and Piezo Unit (Fig. 59)1. Remove the burner as described in section 10.5.2. Undo the thermocouple

2711.0 Short Parts List – Page 2711.1 Short Parts ListKeyNo.40414422232429263019122827G.C.No.E25 213E25 214E25 217E25 198E25 199E01 617E01 353378 924

3Contents - Page 3Section1.02.03.04.05.06.07.08.09.010.011.0IntroductionTechnical DataSite RequirementsInstallationCommissioning the FireArranging the

41.0 Introduction – Page 41.1 Description1. The Baxi Wentworth PCF, Kingston 2 PCF Classic orBelmont 2 are live fuel effect inset gas fires designed

51.0 Introduction – Page 51.3 Installation1. The appliance is suitable for installation only in G.B.and I.E. and should be installed in accordance wi

62.0 Technical Data – Page 6Kingston 2 PCF Classic Wentworth PCF ClassicCategory of Appliance 2HCategory of Appliance 2HThe fire is set for Gas Ty

73.0 Site Requirements – Page 73.1 Site Requirements1. The Baxi Wentworth PCF, Kingston 2 PCF Classic orBelmont 2 gas fires can be fitted to an insta

83.0 Site Requirements – Page 83.5 Twin Walled Metal Flue Boxes1. A double walled metal flue system conforming to theconstructional requirements of B

93.0 Site Requirements – Page 93.8 Clearances (Fig. 9)1. Shelf Clearance - minimum clearance from the hearthto the underside of a combustible shelf s